hiclover 50, 8, a, an, and, are, ash, at, burn, by, ca, capacity, chamber, chemical, chemicals, clinic, clinical, clinical waste, co, com, d, de, des, destruction, di, disposal, en, for, gas, hazardous, hazardous waste, high, how, in, incineration, incinerator, incinerators, is, kg, materials, method, model, non, of, oil, on, org, power, process, products, ru, sa, sludge, solid, temperature, that, the, to, type, types, un, us, waste, waste disposal, wastes, water, what, with, www, y

laboratory incinerator

Incineration is the most environmentally acceptable method of laboratory waste disposal. Combustion of organic materials with excess oxygen at high temperatures for sufficient time results in degradation to elemental constituents or by-products that are easier to handle in an environmentally acceptable manner. In addition to heat, the principle products of incineration are carbon dioxide, water, and oxides of sulfur and nitrogen; depending on what is burned, other volatile materials may also be formed. Nonvolatile products include fly ash and solid residues.

Safe laboratory waste destruction is an ongoing challenge. With such a wide range of pollutants and particulates it is essential laboratory incinerators reach high temperatures to ensure total destruction of hazardous waste streams.Due to the secondary chamber with its 2 second retention period, the laboratory incinerator range is well suited to process all types of clinical & pathological waste such as: Solids (powder, pastes, pills, resins, sludge’s),Packaged wastes (boxes, drums, IBC’s, tubs),Confidential materials, Clinical waste, Controlled drugs, Laboratory chemicals, Reactive wastes,etc.

Items/Model	TS10(PLC)	TS20(PLC)	TS30(PLC)	TS50(PLC)	TS100(PLC)
Burn Rate	10 kg/hour	20 kg/hour	30 kg/hour	50 kg/hour	100 kg/hour
Feed Capacity	20kg	40kg	60kg	100kg	200 kg
Control Mode	PLC	PLC	PLC	PLC	PLC
Combustion Chamber	100L	210L	330L	560L	1200L
Internal Dimensions	50x50x40cm	65x65x50cm	75x75x60cm	100x80x70cm	120x100x100cm
Secondary Chamber	50L	110L	180L	280L	600L
Smoke Filter Chamber	Yes	Yes	Yes	Yes	Yes
Feed Mode	Manual	Manual	Manual	Manual	Manual
Voltage	220V	220V	220V	220V	220V
Power	0.5Kw	0.5Kw	0.5Kw	0.7Kw	0.7Kw
Oil Consumption (kg/hour)	5.4–12.6	7.8–16.3	10.2–20	12.1–24	14–28
Gas Consumption (m3/hour)	6.2–11.4	8–15.7	9.8–20	9.9–26.1	10–32.2
Temperature Monitor	Yes	Yes	Yes	Yes	Yes
Temperature Protection	Yes	Yes	Yes	Yes	Yes
Oil Tank	100L	100L	100L	100L	200L
Feed Door	30x30cm	45x40cm	55x50cm	70x55cm	80x60cm
Chimney	3Meter	3Meter	5Meter	5Meter	10Meter
Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
1st. Chamber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃
2nd. Chamber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃
Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.
Gross Weight	1500kg	2200kg	3000kg	4500kg	6000kg
External Dimensions	140x90x120cm	160x110x130cm	175x120x140cm	230x130x155cm	260x150x180cm

hiclover 50, 8, a, an, and, animal, are, at, burn, burning, business, ca, can, capacity, chamber, co, com, cremation, cremation equipment, d, de, di, dog, en, equipment, for, gas, how, in, incinerator, incinerators, kg, model, oil, on, org, pet, pet incinerator, pets, small, temperature, that, the, to, type, un, us, www, y

pet incinerators

Items/Model	A360	A600	A900	A1200
Burning Rate *animal	20 kgs/Hr.	20 kgs/Hr.	30 kgs/Hr.	60 kgs/Hr.
Feed Capacity *animal	30 kgs	50 kgs	80 kgs	100 kgs
Equipment Weight	2300 kgs	3000 kgs	4000 kgs	4300 kgs
Primary Chamber (Liters)	360	600	900	1200
Secondary Chamber (Liters)	200	200	300	500
External Dimensions (cm)	145x90x175	175 x 100 x 180	200x160x230	220x180x360
Internal Dimensions (cm)	100x60x60	130 x 70 x 65	120x90x85	130x100x90
Oil Tank(Liters)	200	200	300	300
Door Opening (cm)	48 x 60	50 x 60	62 x 80	55 x 80
Chimney (M)	5	5	5	10
Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
Secondary Chamber	YES	YES	YES	YES
Mix-Combustion Chamber	YES	YES	YES	YES
Smoke Filter Chamber	YES	YES	YES	YES
Combustion Fuel	Oil/Gas	Oil/Gas	Oil/Gas	Oil/Gas
Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.
Temperature Monitoring	YES	YES	YES	YES
1st. Chmaber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃
2nd. Chmaber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃

hiclover 50, 8, a, advantages, advantages of incineration, an, and, animal, animal cremation, animal crematory, animal crematory equipment, animal incinerator, animal incinerator for sale, animal incinerator prices, animal incinerators for sale, are, at, brick, burn, burner, buy, ca, can, capacity, chamber, china, clinic, clover, co, com, cost, cremation, cremation equipment, cremator, crematorium, crematory, crematory equipment, d, de, des, design, di, en, equipment, for, from, gas, high, hospital, hospitals, how, in, incineration, incineration equipment, incinerator, incinerator china, incinerator cost, incinerator for sale, incinerator manufacturer, incinerator price, incinerators, incinerators for sale, is, kg, large, manufacturer, manufacturers, medical, medical incinerator, medical waste, method, mobile, model, needle incinerator, of, oil, on, para, parts, pet, pet cremation, pet cremation equipment, pet crematory, pet incinerator, pet incinerator for sale, plant, portable, portable incinerator, price, prices, products, ru, sa, sale, scale, ship, small, small incinerator, system, temperature, that, the, to, treatment, type, un, us, use, used, waste, waste incinerator, waste incinerators, what, what is incinerator, with, www, y

HICLOVER Needle Incinerators-Syringe and Destroyer-Needle Destroyer

1. For clinic,lab, small hospital with low waste output capacity, no condition with other medical waste treatment(Underdeveloped country or area, or emergency situations ).

2. Doctor, nurse treat the syringes, needle, infusion set immediately after use, plug to play, no dispersion risk.

3. melting the syringes needle with 1250Celsius high temperature to metal slag, sterilization immediately. Destroy syringes, infusion set, can not use again.

Medical Needle Incinerator: Melt the needle waste, cut off syring tube with needle, cut off the infusion tube.

Model SYC19, Price: $110usd/set, MOQ: 5 sets.

EXW factory term(donot including shipping cost)

Purchase email: [email protected]

Qustion1: If request 1-4 set only, how to do?

Answer: We will plus $50-$200usd fee per order.

Qustion2: If request more than 5 sets only, any discount?

Answer: We will supply discount quotation accordingly.

Related

Small scale incinerator for hospital 5kgs 10kgs 20kgs and 30kgs per hour average

What are the objectives of incineration?

What are three disadvantages of incinerators?

Heavy duty firebrick for incinerator chamber

hiclover 50, 8, a, air, an, and, are, ash, at, bin, build, burn, burner, by, ca, capacity, chamber, co, com, construction, cost, d, de, des, design, destruction, di, diesel, does, drawing, drawings, en, fired, for, from, gas, hazardous, health, high, in, incineration, incineration means, incinerator, incinerators, is, kg, large, liquid, management, mini, municipal, of, oil, on, org, para, plant, pour, power, price, ru, sa, sale, simple, solid, supplier, system, temperature, that, the, to, un, unit, us, use, used, waste, waste incineration, waste management, water, where, with, work, y

hospital incinerator manufacturers

SECTION V

TECHNICAL SPECIFICATIONS OF THE INCINERATOR

General Description

The plant must have four distinct sections that demonstrate three principles of turbulence, residence time and temperature retention. The regulated sections may include but not limited to:

Overall plant layout
Feed chamber/charging
Primary combustion chamber
Particulate scrubbers
Acid gas
The stack/chimney.
Minimum capacity of primary chamber = 10cubic meters
Burn rate (rate of waste incineration) = 10 kg per hour
Should have a full width counterbalance loading door allowing easy access to the main chamber for loading and removing ash.
The INCINERATOR should be NEMA approved in accordance with Environmental management and coordination (Waste management) Regulations of 2006.

Scope Of Work

The work specified in the contract will include.

Supply, install and commission an incinerator as provided in the technical specifications

Provision for adherence to OSHA and other statutory requirement relating to Health and Safety of workers during execution of the works covered in this

Assessment and preparation and construction of a standard incinerator shed with one waste storage room ( see the design )

Provision of operation and maintenance manuals and drawings complete with maintenance schedule and

Fuel oil storage tank- Mild steel 1000 liters capacity

Onsite training for operation and maintenance

IMPORTANT

To enable the Employer undertake conclusive evaluation of the tender, tenderers are requested to submit with their offers the detailed specifications, drawings and catalogues with Commissioning and maintenance instructions for the Incinerator they intend to Supply, install and commission.

Tenderers who fail to comply with this requirement fully shall have their tender rejected.

TECHICAL SPECIFICATIONS OF THE INCINERATOR

3.1 Feeding and Charging

Controlled hygienic mechanical feeding that does not negatively influence the air temperature in the primary and secondary chambers of the incinerator shall be used.

Primary Combustion

This chamber should be equipped with burners that use low sulphur
The chamber should ensure a minimum exit temperature of 850 degrees
This unit should operate at over 1100 deg C to ensure complete
This chamber should be equipped with burners that use low sulphur
Heavy-duty steel casing
High quality refractory lining and insulation
Large full size top load door and liquid retention
1 x oil fired ignition burners operated on/off

Secondary Combustion Chamber (After burner)

Heavy-duty steel casing
High quality refractory lining and insulation
1 x oil burner
Should be fitted with burners that use low sulphur
Ensure secondary air supply is controlled.
Ensure residence time is not less than two seconds.
Ensure that the gas temperature as measured against the inside wall in the secondary chamber and not in the flame zone is not less than 1100 degrees
Ensure the emitted oxygen content of the emitted gases is not less than 11%
Ensure both primary and secondary combustion temperatures are maintained until all waste is completely

Particulate Removers

A mechanical particulate collector must be incorporated after secondary combustion chamber for removal of particulate pollutants entrained in the flue gas stream. The particulate collectors may include any of the following or a combination thereof:

Cyclone separator
Electrostatic precipitators
Fabric filters

Chimney/Stack

The chimney should have a minimum height of 10 meters above ground level and clear the highest point of the building by not less than 3 meters for all The topography and height of adjacent buildings within 50 meters radius should be taken into account.
The chimney should be visible to the operator from the feeding

The minimum exit velocity should be 10 meters per second and at least twice the surrounding wind speed (Efflux velocity = wind speed x 2) whichever is higher to ensure no down washing of exiting
The point for measurement of emissions shall be

Instrumentation

Instrument for determining the inside wall temperature and not burner flame temperature must be provided for both primary and secondary
An audible and visible alarm must be installed to warn the operator when the secondary chamber temperature drops to below the required
A carbon monoxide and oxygen meter/recorder should be
A smoke density meter/recorder should be
A solid particulate meter/recorder should be
Any other instrument that may be considered

Location / Siting of the Incinerator

a) The incinerator must be sited in accordance with the relevant local municipal authority planning regulations and the topography of the site must be compatible with premises in the

Emission Limits

Combustion efficiency (C.E) shall be at least00% where C.E = %Carbon dioxide x 100 / [% Carbon dioxide + carbon monoxide]
The temperature of the primary chamber shall be 800 +/- 50 degrees centigrade
The secondary chamber gas residence time shall be at least 1 second at 1050 +/- 50 degrees centigrade with 3% oxygen in the stack
Opacity of the smoke must not exceed 20% viewed from 50 metres with naked
All the emission to the air other than steam or water vapour must be odourless and free of mist, fume and
A 99.99% destruction and removal efficiency (DRE) for each principal organic hazardous constituent (POHC) in the waste feed where DRE [ ( Win – Wout) /Win ] x

100 where Win = mass feed rate of the POHC in the waste stream fed to incinerator and Wout = mass emission rate of POHC in the stack prior to the release to the atmosphere.

The average dioxin and furan concentration in the emission should not exceed 80mg/m3 total dioxins and furans if measured for a period of 6 to 16

Ease of Use

Auto
No pilots to
Automatic control and temperature monitoring
Built-in skid facilitates placement

Fuel Efficiency

Rapid incineration means low fuel

Up to 20kgs per hour (dependant on application).
Thick refractory lining rated to 1400 deg C in main chamber retains heat, increasing

Quality Built to Last

Heat resistant 3mm
Stainless steel

Key Features

Low running and maintenance costs
Fully Automatic and simple to operate control panel
Afterburner Preheat
Incineration Temperatures in Excess of 900 degrees C
3 mm Steel Casing and Fully insulated
Dense Refractory Concrete Lining Rated to 1400 degrees C
Solid Hearth to Allow Maximum Burnout
Large Top Opening Lid For Easy Loading
Stainless Steel Flue as standard
12 Months or 1000 hours
Optional Stainless Steel Casing
Heat Recovery System option

3.13	Fuel and Capacity
1.	Low sulphur fuel
2.	Capacity (Cubic Mtr)	.10
3.	Average Capacity	40kg
4.	Fuel Consumption (ltrs / hr)	3

External Dimensions

1.	Length (mm) 735
2.	Width (mm) 500
3.	Height Incl. Flue (mm)	1960
4.	Door Opening (mm)	325 x 325

Internal Dimensions

1.	Length (mm)	620
2.	Width (mm)	390
3.	Height	500

Operation

Minimum Operating Temperature 950
Maximum Operating Temperature 1320

3.	Burn rate per hour	5-20kgs
4.	Temperature Monitoring	Available

Particulate Removers

Cyclone separator
Electrostatic precipitators
Fabric filters

Chimney /Stack

The chimney should have a minimum height of 10 meters above ground level and clear the highest point of the building by not less than 3 meters for all The topography and height of adjacent buildings within 50 meters radius should be taken into account.
If possible the chimney should be visible to the operator from the feeding
The addition of dilution air after combustion in order to achieve the requirement of these guidelines is
The minimum exit velocity should be 10 m/s and at least twice the surrounding wind speed (Efflux velocity = wind speed x 2) whichever is higher to ensure no down washing of exiting
Point for the measurement of emissions shall be

Control Panel

Control of 2 burners
Timer control 0- 12 hours
Integral fan timer control
Temperature and thermostatic control

SCHEDULE 2

NO:	REQUIREMENTS	SUPPLIER’S REMARKS
1.	*Experience* Previous experience in the supply, installation and commissioning of incinerators
2.	1 Year Maintenance Contract
3.	*Work rate* at least10kg per day
4.	*Design* Basic Plan design to Provide Overall plant layout. With Feed chamber/ charging, Primary Combustion Chamber. Secondary Combustion Chamber. Particulate Scrubbers, Acid Gas Scrubbers, The stack/ chimney. Fuel oil tank storage should be Mild steel 1000 liters capacity Chimney Height should be of 10 meters above ground level. Housing facility with one waste storage room Provide Housing designs with adequate cross ventilation Chamber (Afterburner Maximum exit temperature should not be less than 1100oC
5.	*Standard control panel* Safety interlock, Fan Starter, Burner on/ off switch/door safety switch, Auto close down switch, temperatures control mechanism.
6.	*Combustion Chambers* Primary Combustion Chamber Minimum exit temperature should not be less than 850oC Secondary Combustion Maximum exit temperature should be not less than 1100oC

SECTION VII

PRICE SCHEDULE FOR GOODS

Price schedule for Supply, Installation, Testing and Commissioning of an incinerator for Turkwel Power Station

1	2	3	4	5	6
Item	Description	Unit of sale	Quantity	Unit price	Total price
1.	Supply, install, and commission the incinerator as specified.	LOT	1
2.	Construct a standard incinerator housing facility as per the drawing and architectural notes provided	LOT	1
4.	Construct one waste storage room (provide specs on room size, construction material etc)	LOT	1
5.	Supply / adhere to the requirement of OSHA 2007 act 49,50,51,60,61,77,78,79,80,81,100	LOT	1
6.	Onsite training of Operation and Maintenance staff.	LOT	1
7.	All the key Spares (Attach a separate List)	LOT	1
8.	Supply and install 1000 liters Fuel oil storage tank and its secondary containment with Diesel oil level indicator and necessary piping with valves for visual checking of fuel level.	LOT	1
9.	Supply of Operation and Maintenance Manuals.	LOT	1
10.	All other items not specified but necessary to complete the Installation. A separate list of these items to be attached.	LOT	1

11.	Fencing of a compound of 10 meter length by 10 meter width using Concrete poles high Gauge mesh wire , and a lockable gate. (Indicate size and design of gate)	LOT	1
	Sub Total

	Discount (%) if any
	Applicable Taxes and Duties

	Total Cost in Kshs

hiclover a, an, and, ash, at, bin, burn, burning, ca, can, co, com, construction, d, de, di, diesel, en, for, gas, in, incinerator, incinerators, is, mini, mobile, of, oil, on, org, process, ru, sludge, solid, solid waste, system, temperature, that, the, to, treatment, un, unit, units, us, use, used, waste, with, y

Required Specifications for Mobile Incinerator

Operational Capabilities

PROCESS MINIMUM 1 TON PER DAY
OPERATED WITH LIMITED TRAINING
REGULAR MAINTENANCE CAN BE COMPLETED WITH LIMITED TRAINING
COMPLIES WITH EURO / OR US-EPA EMISSION STANDARDS
ABILITY TO BURN WASTE LUBRICANTS (POL)
HANDLE ORGANIC SOLIDS (TO INCLUDE RMW)
DEPLOYABLE
MOBILE
24 HRS OF CONTINUOUS USE
AUTOMATIC LOADING SYSTEM
AUTOMATED ASH REMOVAL SYSTEM
GAS SCRUBBING SYSTEM
95% REDUCTION OF SOLID WASTE
OPERATE OFF DIESEL OR FUEL OIL
CAPABLE OF BURNING 4 UNITS OF WASTE PER UNIT OF FUEL
ABLE TO TAKE ALL COMBUSTIBLE WASTE TO INCLUDE: PAPER, PLASTIC, CARDBOARD, FOOD, USED OILS, SLUDGE, OILY RAGS, WOOD
NO PRE-TREATMENT OF WASTE REQUIRED
FIVE (5) YEAR COMPONENT WARRANTY

Technical Specifications

OPERATION MANUAL AND TRAINING MANUAL FOR EACH INCINERATOR
SET UP AND INSTALLATION INSTRUCTION MANUALS
BLUE PRINT/ SCHEMATIC PROVIDED THAT OUTLINES THE PHYSICAL DIMENSIONS OF THE 20’ INCINERATORS
INCINERATORS COMPOSED WITH HEAVY DUTY WELDED CONSTRUCTION
OPERATED AND TRANSPORTED IN 20’ INCINERATORS (CONTAINERS)
FULL FRONT AND OPTIONAL REAR ACCESS
PRIMARY / SECONDARY TEMPERATURE CONTROLS

hiclover 50, 8, a, an, and, animal, are, at, burn, burning, business, ca, can, capacity, chamber, co, com, cremation, cremation equipment, d, de, des, design, di, disposal, dog, en, equipment, for, gas, human, in, incineration, incinerator, infectious, is, kg, management, model, modern, new, of, oil, on, org, pet, pet cremation, pet cremation equipment, pets, price, prices, ru, sa, small, small incinerator, temperature, that, the, to, treatment, type, un, us, waste, waste disposal, waste management, with, www, y

pet cremation equipment prices

All kindly pets owners hope their lovely dog or cat be in heaven after they leave us. We understand the special bond between pet and owner and believe that it should never be forgotten. Losing a pet can be devastating and we built our business so families can remember their pets forever. pet cremation equipment prices firstly according to small pet or big pet, then small incinerator for cats and small dog or big dogs.
The pet cremation equipment humanized design with movable platform, small space covers for modern pet cremation business owner all over the world.

Animal diseases, new virus strains and spread of infectious diseases are only few of the consequences of improper animal waste treatment. Incineration is the way forward for Bio-secure waste disposal. Modern incineration is recognized as a most efficient solution for significant risk reduction in animal waste management.

Items/Model	A360	A600	A900	A1200
Burning Rate *animal	20 kgs/Hr.	20 kgs/Hr.	30 kgs/Hr.	60 kgs/Hr.
Feed Capacity *animal	30 kgs	50 kgs	80 kgs	100 kgs
Equipment Weight	2300 kgs	3000 kgs	4000 kgs	4300 kgs
Primary Chamber (Liters)	360	600	900	1200
Secondary Chamber (Liters)	200	200	300	500
External Dimensions (cm)	145x90x175	175 x 100 x 180	200x160x230	220x180x360
Internal Dimensions (cm)	100x60x60	130 x 70 x 65	120x90x85	130x100x90
Oil Tank(Liters)	200	200	300	300
Door Opening (cm)	48 x 60	50 x 60	62 x 80	55 x 80
Chimney (M)	5	5	5	10
Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
Secondary Chamber	YES	YES	YES	YES
Mix-Combustion Chamber	YES	YES	YES	YES
Smoke Filter Chamber	YES	YES	YES	YES
Combustion Fuel	Oil/Gas	Oil/Gas	Oil/Gas	Oil/Gas
Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.
Temperature Monitoring	YES	YES	YES	YES
1st. Chmaber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃
2nd. Chmaber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃

hiclover 50, 8, a, an, and, are, at, business, ca, can, co, com, cremation, cremation equipment, d, de, des, design, di, disposal, dog, en, equipment, for, gas, hazardous, hazardous waste, hospital, hospital waste, hospital waste incinerator, human, in, incinerate, incineration, incineration waste, incineration waste disposal, incinerator, is, kg, management, medical, modern, municipal, municipal waste incinerator, new, on, org, pdf, pet, pet cremation, pet cremation equipment, pets, ru, sa, small, solid, that, the, to, type, un, us, waste, waste disposal, waste incineration, waste incinerator, with, www, y

medical waste incineration management

All kindly pets owners hope their lovely dog or cat be in heaven after they leave us. We understand the special bond between pet and owner and believe that it should never be forgotten. Losing a pet can be devastating and we built our business so families can remember their pets forever.incineraters,pet cremation business,cannabis waste removal,municipal waste incinerator,veolia incineratorhospital waste incinerator,hazardous waste incineration,gas incinerator,incineration waste disposal

The pet cremation equipment humanized design with movable platform, small space covers for modern pet cremation business owner all over the world.

hiclover 50, 8, a, advantages, air, an, and, are, at, burn, burner, by, ca, capacity, chamber, chemical, clover, co, com, company, construction, cost, d, de, des, design, di, diesel, en, energy, equipment, for, from, gas, hazardous, high, how, how incinerators work, in, incineration, incineration process, incinerator, incinerators, infectious, is, kg, ltd, made, management, manufacturer, manufacturers, medical, medical waste, mobile, model, municipal, nanjing clover medical technology co ltd, new, non, of, oil, on, pad, para, parts, plant, plastic incineration, pollution, power, price, process, recycling, ru, sa, services, ship, solid, solid waste, system, technology, temperature, that, the, to, type, un, us, use, used, waste, waste incineration, waste incinerator, waste incinerators, waste management, what, with, work, www, y

Advantages of incineration

Advantages of Waste Incineration

Decreases Quantity of Waste. …

Efficient Waste Management. …

Production of Heat and Power. …

Reduction of Pollution. …

Incinerators Have Filters For Trapping Pollutants. …

Saves on Transportation of Waste. …

Provides Better Control Over Odor and Noise. …

Prevents the Production of Methane Gas.

Incinerator Items/Model	TS20(PLC)	TS30(PLC)
Burn Rate (Average)	20-30 kg/hour	30-50 kg/hour
Feed Capacity(Average)	40kg/feeding	60kg/feeding
Control Mode	PLC Automatic	PLC Automatic
1st. Chamber Composition Hot Face	Thickness: ≥115 mm	Thickness: ≥115 mm
	55% of Al203	55% of Al203
	1750°C Grade	1750°C Grade
2nd. Chamber Composition Hot Face	Thickness: ≥200 mm	Thickness: ≥200 mm
	75% of Al203	75% of Al203
	1790°C Grade	1790°C Grade
Chamber Cold Face Material	High Rate Refractory Ceramic Fiber	High Rate Refractory Ceramic Fiber
Other Parts Hot Face Refractory	Heavy Duty with steel fiber	Heavy Duty with steel fiber
Burner operation	Automatic On/Off	Automatic On/Off
Dry Scrubber	Including	Including
Wet Scrubber	Optional	Optional
Top Loading Door	Optional	Optional
Paint for outside face	250°C Grade	250°C Grade
Sealing Material	Refractory Ceramic Fiber	Refractory Ceramic Fiber
Upgrade Containerized Mobile Type	Optional	Optional
CE Certificate	CE(2006/42/EC,2014/30/EU	CE(2006/42/EC,2014/30/EU
ISO Certificate	ISO9001:2015	ISO9001:2015
High-tech Enterprise Certificate	Yes	Yes

What is the importance of incineration?

Incineration is widely used to reduce the volume of municipal solid waste, to

reduce the potential infectious properties and volume of medical waste, and to

reduce the potential toxicity and volume of hazardous chemical and biological waste.

Tel: +86-25-8461 0201

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com
Email: [email protected]
Email: [email protected]

plastic incineration process

nanjing clover medical technology co ltd

electic diesel incinerator

which chinese company’s are into waste management systems

how incinerators work

recycling rubbish plant

Items/Model	TS10(PLC)	TS20(PLC)	TS30(PLC)	TS50(PLC)
Burn Rate (Average)	10 kg/hour	20 kg/hour	30 kg/hour	50 kg/hour
Control Mode	PLC Auto.	PLC Auto.	PLC Auto.	PLC Auto.
Combustion Chamber	100L	210L	330L	560L
Internal Dimensions	50x50x40cm	65x65x50cm	75x75x60cm	100x80x70cm
Secondary Chamber	50L	110L	180L	280L
Smoke Filter Chamber	Dry Scrubber	Dry Scrubber	Dry Scrubber	Dry Scrubber
Feed Mode	Manual	Manual	Manual	Manual
Voltage	220V	220V	220V	220V
Power	0.75Kw	0.83Kw	0.99Kw	1.2Kw
Diesel Oil Consumption (kg/hour)	Ave.8.4	Ave.10.9	Ave.13.3	Ave.16.9
Natural Gas Consumption (m3n/hour)	Ave.10.1	Ave.13	Ave.16	Ave.20.2
Temperature Monitor	Yes	Yes	Yes	Yes
Temperature Protection	Yes	Yes	Yes	Yes
Items/Model	TS100(PLC)	TS150(PLC)	TS300(PLC)	TS500(PLC)
Burn Rate (Average)	100 kg/hour	150 kg/hour	300 kg/hour	500 kg/hour
Control Mode	PLC Auto.	PLC Auto.	PLC Auto.	PLC Auto.
Combustion Chamber	1200L	1500L	2000L	3000L
Internal Dimensions	120x100x100cm	150x100x100cm	170x120x100cm	210x120x120cm
Secondary Chamber	600L	750L	1000L	1500L
Smoke Filter Chamber	Dry Scrubber	Dry Scrubber	Dry Scrubber	Dry Scrubber
Feed Mode	Manual	Manual	Manual	Manual
Voltage	220V	220V	220V	220V
Power	1.38Kw	1.69Kw	2.57Kw	4.88Kw
Diesel Oil Consumption (kg/hour)	Ave.20.4	Ave.24.2	Ave.33	Ave.44
Natural Gas Consumption (m3n/hour)	Ave.24.5	Ave.29	Ave.39.6	Ave.52.8
Temperature Monitor	Yes	Yes	Yes	Yes
Temperature Protection	Yes	Yes	Yes	Yes

The control system shall include an electronic performance monitoring and logging

system. The system shall be capable of monitoring and logging chamber temperatures

at regular intervals (not less than once per minute, with the capacity to vary the logging

frequency). The system shall include the capacity to download the performance data by

USB connection.

All the measuring devices attached with the incinerator should have digital display

and should have provision of connecting to the recording system, which should include

fuel meter and separate energy meter.

The temperature shall be determined against the inside wall of the combustion

chambers. An audible and visible alarm shall be installed to warn the operator when

the secondary temperature drops to below the required temperature.

The primary chamber must meet or exceed the following criteria:

“• Heavy steel construction.

thermocouple

• temperature gauge

• fire rope

• burner

• induction air fan

• digital temperature display panel”

Optional maintenance service The contractor shall deploy an expert, fully equipped

with all required tools and equipment, to the client to provide maintenance service of the

installed waste incinerators, including all the parts and components (e.g., burners,

ignitors, temperature gauges) when required.

4.5.1 The goods, including all packaging and packing thereof, conform to the

specifications of the Contract, are fit for the purposes for which such goods are

ordinarily used and for any purposes expressly made known in writing in the Contract,

and shall be of even quality, free from faults and defects in design, material,

manufacturer and workmanship;

4.5.2 If the Contractor is not the original manufacturer of the goods, the

Contractor shall provide UNOPS with the benefit of all manufacturers’

warranties in addition to any other warranties required to be provided under the Contract;

4.5.3 The goods are of the quality, quantity and description required by the

Contract, including when subjected to conditions prevailing in the place of final destination;

The goods are free from any right of claim by any third-party, including claims

of infringement of any 4.5.4intellectual property rights, including, but not limited

to, patents, copyright and trade secrets;

4.5.5 The goods are new and unused;

4.5.6 All warranties will remain fully valid following any delivery of the goods

and for a period of not less than one (1) year following acceptance of the goods

by UNOPS in accordance with the Contract;

4.5.7 During any period in which the Contractor’s warranties are effective,

upon notice by UNOPS that the goods do not conform to the requirements

of the Contract, the Contractor shall promptly and at its own expense correct

such non-conformities or, in case of its inability to do so, replace the defective

goods with goods of the same or better quality or, at its own cost, remove the

defective goods and fully reimburse UNOPS for the purchase price paid for

the defective goods; and,

4.5.8 The Contractor shall remain responsive to the needs of UNOPS for any

services that may be required in connection with any of the Contractor’s

warranties under the Contract.

hiclover 50, 8, a, advantages, advantages of incineration, air, an, and, are, ash, at, burn, burning, ca, capacity, chamber, chemical, co, com, d, de, des, destruction, di, dispose, disposing, does, en, for, from, high, hospital, hospital incinerator, hospital waste, hospitals, how, in, incineration, incinerator, incinerators, is, kg, medical, medical waste, medical waste incinerator, method, methods, model, of, on, pharmaceutical, process, ru, sa, small, temperature, that, the, to, type, types, types of medical waste, urns, us, use, used, waste, waste incinerator, wastes, what, what is incinerator, work, www, y

Small scale incinerator for hospital 5kgs 10kgs 20kgs and 30kgs per hour average

50 bed hospital proposal model TS5 or TS10 incinerator

200 bed hospital proposal model TS50 incinerator

we have more than 1000kgs per hour capacity incinerator.

How does a hospital incinerator work?

The incinerator comprises primary and secondary combustion chambers. The burning zone

of the primary chamber is accessible through a door at the front which lets in air and allows the operator to light the fire and remove the ash. The medical waste is dropped in through a loading door above the primary chamber.

How is hospital waste disposed of?

Two common methods of disposing of hospital-generated medical waste include incineration

or autoclaving. Incineration is a process that burns medical waste in a controlled environment. …

State regulations may mandate off-site incineration for certain types of waste.

The main purpose of any medical waste incinerator is to eliminate pathogens from waste and

reduce the waste to ashes. However, certain types of medical wastes, such as pharmaceutical

or chemical wastes, require higher temperatures for complete destruction.

hiclover 50, 8, a, an, and, animal, at, burn, burning, business, ca, can, capacity, chamber, co, com, d, de, di, dog, en, equipment, for, from, gas, in, incinerator, incinerator price, kg, model, of, oil, on, org, pet, pet incinerator, pets, price, prices, small, temperature, that, the, to, type, un, us, what, www, y

pet incinerator prices

All kindly pets owners hope their lovely dog or cat be in heaven after they leave us. We understand the special bond between pet and owner and believe that it should never be forgotten. Losing a pet can be devastating and we built our business so families can remember their pets forever. the range of pet incinerator prices from 10000 usd to 30000 usd. you have to confirm what size of the pet, cat or small dog or big dog or other big animal.

Items/Model	A360	A600	A900	A1200
Burning Rate *animal	20 kgs/Hr.	20 kgs/Hr.	30 kgs/Hr.	60 kgs/Hr.
Feed Capacity *animal	30 kgs	50 kgs	80 kgs	100 kgs
Equipment Weight	2300 kgs	3000 kgs	4000 kgs	4300 kgs
Primary Chamber (Liters)	360	600	900	1200
Secondary Chamber (Liters)	200	200	300	500
External Dimensions (cm)	145x90x175	175 x 100 x 180	200x160x230	220x180x360
Internal Dimensions (cm)	100x60x60	130 x 70 x 65	120x90x85	130x100x90
Oil Tank(Liters)	200	200	300	300
Door Opening (cm)	48 x 60	50 x 60	62 x 80	55 x 80
Chimney (M)	5	5	5	10
Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
Secondary Chamber	YES	YES	YES	YES
Mix-Combustion Chamber	YES	YES	YES	YES
Smoke Filter Chamber	YES	YES	YES	YES
Combustion Fuel	Oil/Gas	Oil/Gas	Oil/Gas	Oil/Gas
Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.
Temperature Monitoring	YES	YES	YES	YES
1st. Chmaber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃
2nd. Chmaber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃

HICLOVER

HICLOVER

Tag Archives: that

Related

The pet cremation equipment humanized design with movable platform, small space covers for modern pet cremation business owner all over the world.

Related