chemical - HICLOVER

hiclover 50, 8, a, an, and, are, ash, at, burn, by, ca, capacity, chamber, chemical, chemicals, clinic, clinical, clinical waste, co, com, d, de, des, destruction, di, disposal, en, for, gas, hazardous, hazardous waste, high, how, in, incineration, incinerator, incinerators, is, kg, materials, method, model, non, of, oil, on, org, power, process, products, ru, sa, sludge, solid, temperature, that, the, to, type, types, un, us, waste, waste disposal, wastes, water, what, with, www, y

laboratory incinerator

Incineration is the most environmentally acceptable method of laboratory waste disposal. Combustion of organic materials with excess oxygen at high temperatures for sufficient time results in degradation to elemental constituents or by-products that are easier to handle in an environmentally acceptable manner. In addition to heat, the principle products of incineration are carbon dioxide, water, and oxides of sulfur and nitrogen; depending on what is burned, other volatile materials may also be formed. Nonvolatile products include fly ash and solid residues.

Safe laboratory waste destruction is an ongoing challenge. With such a wide range of pollutants and particulates it is essential laboratory incinerators reach high temperatures to ensure total destruction of hazardous waste streams.Due to the secondary chamber with its 2 second retention period, the laboratory incinerator range is well suited to process all types of clinical & pathological waste such as: Solids (powder, pastes, pills, resins, sludge’s),Packaged wastes (boxes, drums, IBC’s, tubs),Confidential materials, Clinical waste, Controlled drugs, Laboratory chemicals, Reactive wastes,etc.

Items/Model	TS10(PLC)	TS20(PLC)	TS30(PLC)	TS50(PLC)	TS100(PLC)
Burn Rate	10 kg/hour	20 kg/hour	30 kg/hour	50 kg/hour	100 kg/hour
Feed Capacity	20kg	40kg	60kg	100kg	200 kg
Control Mode	PLC	PLC	PLC	PLC	PLC
Combustion Chamber	100L	210L	330L	560L	1200L
Internal Dimensions	50x50x40cm	65x65x50cm	75x75x60cm	100x80x70cm	120x100x100cm
Secondary Chamber	50L	110L	180L	280L	600L
Smoke Filter Chamber	Yes	Yes	Yes	Yes	Yes
Feed Mode	Manual	Manual	Manual	Manual	Manual
Voltage	220V	220V	220V	220V	220V
Power	0.5Kw	0.5Kw	0.5Kw	0.7Kw	0.7Kw
Oil Consumption (kg/hour)	5.4–12.6	7.8–16.3	10.2–20	12.1–24	14–28
Gas Consumption (m3/hour)	6.2–11.4	8–15.7	9.8–20	9.9–26.1	10–32.2
Temperature Monitor	Yes	Yes	Yes	Yes	Yes
Temperature Protection	Yes	Yes	Yes	Yes	Yes
Oil Tank	100L	100L	100L	100L	200L
Feed Door	30x30cm	45x40cm	55x50cm	70x55cm	80x60cm
Chimney	3Meter	3Meter	5Meter	5Meter	10Meter
Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
1st. Chamber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃
2nd. Chamber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃
Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.
Gross Weight	1500kg	2200kg	3000kg	4500kg	6000kg
External Dimensions	140x90x120cm	160x110x130cm	175x120x140cm	230x130x155cm	260x150x180cm

afghanistan-incinerator australia-incinerator burkina-faso-incinerator burundi-incinerator cameroon-incinerator congo-incinerator egypt-incinerator ethiopia-incinerator georgia-incinerator iraq-incinerator kazakhstan-incinerator kenya-incinerator liberia-incinerator madagascar-incinerator malawi-incinerator mali-incinerator morocco-incinerator nigeria-incinerator oman-incinerator pakistan-incinerator papua-new-guinea-incinerator rwanda-incinerator saudi-arabia-incinerator senegal-incinerator sierra-leone-incinerator somalia-incinerator sudan-incinerator syria-incinerator tajikistan-incinerator tanzania-incinerator uae-incinerator uganda-incinerator usa-incinerator uzbekistan-incinerator yemen-incinerator zambia-incinerator

hiclover 50, 8, a, advantages, air, an, and, are, at, burn, burner, by, ca, capacity, chamber, chemical, clover, co, com, company, construction, cost, d, de, des, design, di, diesel, en, energy, equipment, for, from, gas, hazardous, high, how, how incinerators work, in, incineration, incineration process, incinerator, incinerators, infectious, is, kg, ltd, made, management, manufacturer, manufacturers, medical, medical waste, mobile, model, municipal, nanjing clover medical technology co ltd, new, non, of, oil, on, pad, para, parts, plant, plastic incineration, pollution, power, price, process, recycling, ru, sa, services, ship, solid, solid waste, system, technology, temperature, that, the, to, type, un, us, use, used, waste, waste incineration, waste incinerator, waste incinerators, waste management, what, with, work, www, y

Advantages of incineration

Advantages of Waste Incineration

Decreases Quantity of Waste. …

Efficient Waste Management. …

Production of Heat and Power. …

Reduction of Pollution. …

Incinerators Have Filters For Trapping Pollutants. …

Saves on Transportation of Waste. …

Provides Better Control Over Odor and Noise. …

Prevents the Production of Methane Gas.

Incinerator Items/Model	TS20(PLC)	TS30(PLC)
Burn Rate (Average)	20-30 kg/hour	30-50 kg/hour
Feed Capacity(Average)	40kg/feeding	60kg/feeding
Control Mode	PLC Automatic	PLC Automatic
1st. Chamber Composition Hot Face	Thickness: ≥115 mm	Thickness: ≥115 mm
	55% of Al203	55% of Al203
	1750°C Grade	1750°C Grade
2nd. Chamber Composition Hot Face	Thickness: ≥200 mm	Thickness: ≥200 mm
	75% of Al203	75% of Al203
	1790°C Grade	1790°C Grade
Chamber Cold Face Material	High Rate Refractory Ceramic Fiber	High Rate Refractory Ceramic Fiber
Other Parts Hot Face Refractory	Heavy Duty with steel fiber	Heavy Duty with steel fiber
Burner operation	Automatic On/Off	Automatic On/Off
Dry Scrubber	Including	Including
Wet Scrubber	Optional	Optional
Top Loading Door	Optional	Optional
Paint for outside face	250°C Grade	250°C Grade
Sealing Material	Refractory Ceramic Fiber	Refractory Ceramic Fiber
Upgrade Containerized Mobile Type	Optional	Optional
CE Certificate	CE(2006/42/EC,2014/30/EU	CE(2006/42/EC,2014/30/EU
ISO Certificate	ISO9001:2015	ISO9001:2015
High-tech Enterprise Certificate	Yes	Yes

What is the importance of incineration?

Incineration is widely used to reduce the volume of municipal solid waste, to

reduce the potential infectious properties and volume of medical waste, and to

reduce the potential toxicity and volume of hazardous chemical and biological waste.

Tel: +86-25-8461 0201

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com
Email: [email protected]
Email: [email protected]

plastic incineration process

nanjing clover medical technology co ltd

electic diesel incinerator

which chinese company’s are into waste management systems

how incinerators work

recycling rubbish plant

Items/Model	TS10(PLC)	TS20(PLC)	TS30(PLC)	TS50(PLC)
Burn Rate (Average)	10 kg/hour	20 kg/hour	30 kg/hour	50 kg/hour
Control Mode	PLC Auto.	PLC Auto.	PLC Auto.	PLC Auto.
Combustion Chamber	100L	210L	330L	560L
Internal Dimensions	50x50x40cm	65x65x50cm	75x75x60cm	100x80x70cm
Secondary Chamber	50L	110L	180L	280L
Smoke Filter Chamber	Dry Scrubber	Dry Scrubber	Dry Scrubber	Dry Scrubber
Feed Mode	Manual	Manual	Manual	Manual
Voltage	220V	220V	220V	220V
Power	0.75Kw	0.83Kw	0.99Kw	1.2Kw
Diesel Oil Consumption (kg/hour)	Ave.8.4	Ave.10.9	Ave.13.3	Ave.16.9
Natural Gas Consumption (m3n/hour)	Ave.10.1	Ave.13	Ave.16	Ave.20.2
Temperature Monitor	Yes	Yes	Yes	Yes
Temperature Protection	Yes	Yes	Yes	Yes
Items/Model	TS100(PLC)	TS150(PLC)	TS300(PLC)	TS500(PLC)
Burn Rate (Average)	100 kg/hour	150 kg/hour	300 kg/hour	500 kg/hour
Control Mode	PLC Auto.	PLC Auto.	PLC Auto.	PLC Auto.
Combustion Chamber	1200L	1500L	2000L	3000L
Internal Dimensions	120x100x100cm	150x100x100cm	170x120x100cm	210x120x120cm
Secondary Chamber	600L	750L	1000L	1500L
Smoke Filter Chamber	Dry Scrubber	Dry Scrubber	Dry Scrubber	Dry Scrubber
Feed Mode	Manual	Manual	Manual	Manual
Voltage	220V	220V	220V	220V
Power	1.38Kw	1.69Kw	2.57Kw	4.88Kw
Diesel Oil Consumption (kg/hour)	Ave.20.4	Ave.24.2	Ave.33	Ave.44
Natural Gas Consumption (m3n/hour)	Ave.24.5	Ave.29	Ave.39.6	Ave.52.8
Temperature Monitor	Yes	Yes	Yes	Yes
Temperature Protection	Yes	Yes	Yes	Yes

The control system shall include an electronic performance monitoring and logging

system. The system shall be capable of monitoring and logging chamber temperatures

at regular intervals (not less than once per minute, with the capacity to vary the logging

frequency). The system shall include the capacity to download the performance data by

USB connection.

All the measuring devices attached with the incinerator should have digital display

and should have provision of connecting to the recording system, which should include

fuel meter and separate energy meter.

The temperature shall be determined against the inside wall of the combustion

chambers. An audible and visible alarm shall be installed to warn the operator when

the secondary temperature drops to below the required temperature.

The primary chamber must meet or exceed the following criteria:

“• Heavy steel construction.

thermocouple

• temperature gauge

• fire rope

• burner

• induction air fan

• digital temperature display panel”

Optional maintenance service The contractor shall deploy an expert, fully equipped

with all required tools and equipment, to the client to provide maintenance service of the

installed waste incinerators, including all the parts and components (e.g., burners,

ignitors, temperature gauges) when required.

4.5.1 The goods, including all packaging and packing thereof, conform to the

specifications of the Contract, are fit for the purposes for which such goods are

ordinarily used and for any purposes expressly made known in writing in the Contract,

and shall be of even quality, free from faults and defects in design, material,

manufacturer and workmanship;

4.5.2 If the Contractor is not the original manufacturer of the goods, the

Contractor shall provide UNOPS with the benefit of all manufacturers’

warranties in addition to any other warranties required to be provided under the Contract;

4.5.3 The goods are of the quality, quantity and description required by the

Contract, including when subjected to conditions prevailing in the place of final destination;

The goods are free from any right of claim by any third-party, including claims

of infringement of any 4.5.4intellectual property rights, including, but not limited

to, patents, copyright and trade secrets;

4.5.5 The goods are new and unused;

4.5.6 All warranties will remain fully valid following any delivery of the goods

and for a period of not less than one (1) year following acceptance of the goods

by UNOPS in accordance with the Contract;

4.5.7 During any period in which the Contractor’s warranties are effective,

upon notice by UNOPS that the goods do not conform to the requirements

of the Contract, the Contractor shall promptly and at its own expense correct

such non-conformities or, in case of its inability to do so, replace the defective

goods with goods of the same or better quality or, at its own cost, remove the

defective goods and fully reimburse UNOPS for the purchase price paid for

the defective goods; and,

4.5.8 The Contractor shall remain responsive to the needs of UNOPS for any

services that may be required in connection with any of the Contractor’s

warranties under the Contract.

afghanistan-incinerator australia-incinerator burkina-faso-incinerator burundi-incinerator cameroon-incinerator congo-incinerator egypt-incinerator ethiopia-incinerator georgia-incinerator iraq-incinerator kazakhstan-incinerator kenya-incinerator liberia-incinerator madagascar-incinerator malawi-incinerator mali-incinerator morocco-incinerator nigeria-incinerator oman-incinerator pakistan-incinerator papua-new-guinea-incinerator rwanda-incinerator saudi-arabia-incinerator senegal-incinerator sierra-leone-incinerator somalia-incinerator sudan-incinerator syria-incinerator tajikistan-incinerator tanzania-incinerator uae-incinerator uganda-incinerator usa-incinerator uzbekistan-incinerator yemen-incinerator zambia-incinerator

hiclover 50, 8, a, advantages, advantages of incineration, air, an, and, are, ash, at, burn, burning, ca, capacity, chamber, chemical, co, com, d, de, des, destruction, di, dispose, disposing, does, en, for, from, high, hospital, hospital incinerator, hospital waste, hospitals, how, in, incineration, incinerator, incinerators, is, kg, medical, medical waste, medical waste incinerator, method, methods, model, of, on, pharmaceutical, process, ru, sa, small, temperature, that, the, to, type, types, types of medical waste, urns, us, use, used, waste, waste incinerator, wastes, what, what is incinerator, work, www, y

Small scale incinerator for hospital 5kgs 10kgs 20kgs and 30kgs per hour average

50 bed hospital proposal model TS5 or TS10 incinerator

200 bed hospital proposal model TS50 incinerator

we have more than 1000kgs per hour capacity incinerator.

How does a hospital incinerator work?

The incinerator comprises primary and secondary combustion chambers. The burning zone

of the primary chamber is accessible through a door at the front which lets in air and allows the operator to light the fire and remove the ash. The medical waste is dropped in through a loading door above the primary chamber.

How is hospital waste disposed of?

Two common methods of disposing of hospital-generated medical waste include incineration

or autoclaving. Incineration is a process that burns medical waste in a controlled environment. …

State regulations may mandate off-site incineration for certain types of waste.

The main purpose of any medical waste incinerator is to eliminate pathogens from waste and

reduce the waste to ashes. However, certain types of medical wastes, such as pharmaceutical

or chemical wastes, require higher temperatures for complete destruction.

HICLOVER

HICLOVER

Tag Archives: chemical

laboratory incinerator

Advantages of incineration

Small scale incinerator for hospital 5kgs 10kgs 20kgs and 30kgs per hour average

Related